|
Universal Mixing and Cutting Machine |
 |
 |
Art.N: 61.2410.00
Machine is designated for preparation of milk products – melted cheese and other products made on analogue recipes in food processing plants.
Machine is made as welded construction, entirely of stainless steel AISI 304.
Consists of vessel with insulated heating and cooling jacket, reduction gear, mixing mechanism and three cutter knives.
Options:
Control unit – DELTA HOLAND controller with „touch screen” panel.
ISO 9001:2008 
The machine complies with the Concil Directives
No. 98/37/EEC and 73/23/EEC and USDA regulations
|
|
Technical data:
| Bowl capacity |
l |
80 |
| Total installed power |
kW |
18
|
| Supply voltage |
V;Hz |
380; 50 |
| Level of protection |
IP
|
65
|
| Air supply |
bar |
4,5÷6 |
| Knife speed, smooth adjustment |
rpm
|
300÷3000 |
| Mixer speed, smooth adjustment |
rpm |
10÷100 |
| Steam pressure |
bar |
0,4÷3 |
| Pneumatic system supply |
mm |
8 |
Dimensions:
- Length
- Width |
mm
mm
|
1865
1193,5
|
| Width in unloading position |
mm |
2022 |
| Height with lifted cover |
mm |
2050 |
| Weight |
kg |
560 |
|
|
|
|
|
Last Updated on Thursday, 20 May 2010 11:30 |
|
|
Pick & Place Robot |
|
|
Pick & Place Robot760 SeriesA fully automatic unit suitable for top loading of products into cases, trays or crates. Products that can be lifted with vacuum, magnetic tool or gripper can also be packed. The machine consists of tooth belt driven linear units for X and Z movements mounted in a stainless steel frame with interlocked guarding. Products and package conveyors with guides included. The nominal capacity is up to 30 cycles per minute depending on weight and travel distance. Control is done by a PLC and operator panel for easy operation. Format changes are carried out by adjustments, change parts and a Teach-In programme. |
|
Last Updated on Saturday, 27 June 2009 11:32 |
|
Palletiser |
|
|
Palletiser740 SeriesA modular designed palletizeи which can be adapted for both semi or fully automatic operation. The loading height can be at high or low level to allow connection to any existing conveyors. Packs are collated on an in feed conveyor, row by row, before being transferred to the loading plate by a pneumatic pusher. When a layer is complete, the loading plate seeks the correct level and moves out above the pallet for adjustment of the correct level. Two sweeper arms - one above and one below the loading plate - fix the new layer as well as the previous load, loading plate retracts. All movements of the loading table are motor driven. The palletiser can be equipped with pallet magazine and pallet outfeed conveyors. The machine is easy to fit into an existing factory layout as the pallet magazine, infeed and outfeed conveyors can be placed in several different positions. |
|
Last Updated on Saturday, 27 June 2009 11:27 |
|
Shrink Wrapper |
|
|
Shrink Wrapper 730 Series
Description - http://www.trepko.com/page.php?idkat=392 Trepko shrink wrappers are fully automatic, robustly constructed machines designed for the shrink wrapping of products with or without trays or alternatively on base boards. The shrink wrappers are energy efficient and capable of continuous operation in a variety of conditions. Minimal maintenance is required on the machines, with all service parts easily & quickly accessible. The shrink tunnel is rated either at a standard 8 kW or for higher speeds 14 kW. Two thirds of this heat can be thermostatically controlled . The machines are compatible with various types of shrink film and will operate with equal efficiency using low, medium or high density shrink film between 40-80 microns in thickness. For improved flexibility and efficiency the machines can be equipped with accessories for perforation, film end indication, film loading etc. |
|
Last Updated on Monday, 10 August 2009 12:19 |
|
Wrap Around Packer |
|
|
Wrap Around Packer710 Series Description - http://www.trepko.com/page.php?idkat=390 TREPKO wrap-around packers are fully automatic machines which group and pack products in cases or trays formed from a flat sheet of corrugated board. The flat sheet, referred to as a ‘blank’, is folded and glued around the pre-arranged products to form the case/tray.
The machine consists of flexible basic modules designed to meet the current customer requirements with regard to pack type and size and also allows for future additions if and when they are required.
The machine is designed incorporating unique & interchangeable ‘blank’ feeders to allow different case/tray sizes to run on the same machine. This changeover procedure requires little time with all the different sized change parts easily & quickly accessible.
All packaging takes place at one level with a maximum output speed of 20 cases per minute. The machine can also be loaded with several ‘blank' stacks for longer runs without the need for loading. |
|
Last Updated on Saturday, 27 June 2009 11:09 |
|
|
|
|
<< Start < Prev 1 2 3 Next > End >>
|
|
Page 1 of 3 |
Filling and Wrapping Machines
